Select-Arc | Welding Wire
The only commercially available FCAW-G wire consistently meeting industry demands of toughness at cryogenic temps. Created to meet you corrosion and overlay needs when welding “in-position” isn’t possible. Select-Arc, Inc. 800-341-5215. Ft. Loramie, Ohio.
Select 720 - Select-Arc
Designed for ease of welding in all positions. Arc transfer is soft; resides on the puddle in a small to medium droplet transfer. Mechanical properties exceed the minimum AWS requirements and rival E7018 electrodes. Intended for use with 100% CO₂ or 75-80% Ar/balance CO₂.
Select 70C-6 - Select-Arc
The versatility of a slag free cored wire makes this ideal for general fabrication, structural steel welds, and thin section applications, such as automotive components and hot water heaters.
Select 730 - Select-Arc
This product is optimized for superb arc transfer characteristics with 75-80% Ar/Balance CO₂ shielding gas, but may also be used with 100% CO₂, with the transfer mode being small droplets and resembling molten metal spraying onto the weld puddle.
Select 70C-6 Plus - Select-Arc
Intended for welding carbon steels, such as ASTM A36, A515, and A516; Can be pulse welded in all positions (call in for parameters). The versatility of a slag free cored wire makes this ideal for general fabrication, structural steel welds, and thin section applications, such as automotive components and hot water heaters.
Select 727 - Select-Arc
Intended for single and multiple pass welding of carbon steels, such as ASTM A36, A285, A515-Gr 70, A572-Gr 50, A992-Gr 50, and A516-Gr 70. The arc is a small to medium droplet size spray, with a slightly soft transfer. Well suited for general fabrication and structural steel welding.
Select 820-Ni1 - Select-Arc
Intended for use with 100% CO₂ or blends of 75-80% Ar/balance CO₂ shielding gases. Designed with 1% nickel and microalloying to produce welds with enhanced CVN toughness. The arc transfer is soft; it melts onto the puddle in a small to medium droplet mode.
SelectWear 52W-S - Select-Arc
Features. Deposits a martensitic alloy similar in composition to an H-12 tool steel. May be used in hot wear applications up to 1100F. Very good in highly compressive situations. Chemistry: Fe-Cr-W-Mo-C. Multiple layers are possible with proper welding procedure.
Select ER70S-6 - Select-Arc
A carbon steel, solid “MIG wire” electrode with copper coating, for gas shielded arc welding. Higher level of deoxidizers enhances welding over hot rolled and rusted/oxidized plate material. Excellent feedability and welding. Intended for welding carbon steels, such as ASTM A36, A515, A516, and A572. Smaller diameters (1/16” or smaller ...
Select 80C-Ni1 - Select-Arc
Intended for welding horizontal and flat fillets and flat groove welds. Can be used with shielding gas mixtures of 75-95% Ar/balance CO₂, and 95-98% Ar/balance O₂. A good selection for welding steels such as ASTM A203-Grade E, A302, A575, and A633.