Clarification on rigging for hoisting multiple bundles of …
May 6, 2019 · A contractor is using a multiple lift rigging assembly to hoist multiple bundles of reinforcing steel. The bundles are rigged in accordance with the requirements of 29 CFR 1926.753 (e).
1926.753 - Hoisting and rigging. | Occupational Safety and Health ...
The multiple lift rigging assembly shall be rigged with members: 1926.753(e)(4)(i) Attached at their center of gravity and maintained reasonably level;
Multiple Lift Rigging, what can you tree? - Steel Erectors …
Jun 15, 2021 · Multiple Lift Rigging (Christmas-Treeing), is allowed only for steel erectors and should only be done when the outlined criteria are met. Recently, I have seen erection companies perform multiple lifts with items not approved under OSHA’s final rule.
29 CFR § 1926.753 - Hoisting and rigging. - LII / Legal …
(1) A multiple lift shall only be performed if the following criteria are met: (i) A multiple lift rigging assembly is used; (ii) A maximum of five members are hoisted per lift;
1926.751 - Definitions. - Occupational Safety and Health Administration
Multiple lift rigging means a rigging assembly manufactured by wire rope rigging suppliers that facilitates the attachment of up to five independent loads to the hoist rigging of a crane. Opening means a gap or void 12 inches (30.5 cm) or more in its least dimension in a floor, roof or other walking/working surface.
For multiple lifts, all rigging must be manufactured by a rope rigging supplier. It must have a 5 to 1 safety factor on all components. Remember to use manufacturer approved rigging assembly and not just multiple loads on the same hook.
USACE allows multiple lift rigging practices for the purpose of erecting/placing structural steel ONLY. 15.C.01 Strict compliance with this section and 29 CFR 1926.753 Subpart R shall be...
Clarification on rigging for hoisting multiple bundles of …
Dec 12, 2023 · A contractor is using a multiple lift rigging assembly to hoist multiple bundles of reinforcing steel. The bundles are rigged in accordance with the requirements of 29 CFR 1926.753(e). Scenario 2:
eCFR :: 29 CFR 1926.753 -- Hoisting and rigging.
(1) A multiple lift shall only be performed if the following criteria are met: ( i ) A multiple lift rigging assembly is used; ( ii ) A maximum of five members are hoisted per lift;
Multiple Lift Rigging Procedures - Compliance Training Online
Multiple lift rigging is the practice of hoisting multiple beams or similar objects at the same time. If done improperly, this can create a falling object hazard. Multiple lift rigging must only be done if the following criteria are met: A rigging assembly specifically for multiple lifting is used. No more than five objects are lifted at once.