Installation and instruction manual Laing DDC pumps www.laing.de Application The Laing DDC series pumps are primarily used for the circulation of cooling liquid in liquid cooled computers. Construction - The Laing DDC pumps are spherical motor pumps, which provide very quiet operation and long life.
There are many ways to install your EK-Quantum Volume/Kinetic FLT D5/DDC Body as it utilizes a standard fan mounting hole pattern with 15 mm spacing, the same as all EK radiators.
1. Install the EK-XTOP DDC on to the pump main motor housing. Make sure you re-use the original o-ring gasket! Reseat the gasket if needed. You can rotate the XTOP DDC in and use it in any direction (90° step turns). 2. Secure the XTOP DDC using enclosed DDC Screw with the 2mm Allen key. Do not over tighten the screws as excessive force
Installing the EK-Quantum Kinetic TBE 120/160 DDC combo unit directly into the chassis: The assembly can be mounted on any flat surface inside your computer chassis. You must drill four (4) 4.2 mm holes using the power drill in a 50 x 50 mm square pattern.
Installation and instruction manual Laing DDC-3 series pumps - The pump must be mounted below the level of an open expansion tank. - Ideally the pump should be placed at the lowest point of the system. - The pump is mounted on a flat surface. Avoid bending the pump by over tightening of the screws. Installation position
Installing a D5 pump on an EKWB distro plate for the O11D XL
May 7, 2021 · Now came the issue of how to install this pump in place of the DDC pump the distro plate was designed to use.
Product Instruction Manuals - Fill-Rite
Download the Instruction Manuals for Your Fill-Rite Products. Our Manuals Highlight Information on Installation, Operation, Maintenance, and Troubleshooting.
Replace Bykski DDC pump with EKWB DDC pump? - Linus Tech …
Jul 6, 2023 · I’m still very eager to hear from anyone who has replaced a Bykski DDC with a EKWB / Xylem / Liang DDC pump. The Bykski is apparently a clone of the Xylem DDC, but I cannot find precise dimensions of either pump online or any confirmation from anyone that they are directly swappable.
How To Install A Fill-Rite NX25-DDC Series DC Fuel Transfer Pump …
Do these 13 steps to get your NX25-DDC pump mounted onto your fuel tank. Fill-Rite's NX25-DDC pump is a simple install if you follow the directions in the video above or listed down below. Please note that foot mount bung adapters are also available for this pump.
DDC/D5 pump install questions for custom watercooling
Sep 15, 2018 · The D5 pump is powerful enough to push the fluid all the way up to the top block so no worries on that. As long as there is enough fluid in the system, flow will be enough to keep everything cool. You can follow the pump and fitting orientation as show in the sled picture.
- Some results have been removed