the dry time (recommended conditions of 65-80˚F/40-60% relative humidity). 7. For smoothest results, see INTERCOAT ABRASION. At a minimum between coats, vacuum, and tack thoroughly with a Bona Microfiber Cleaning Pad (dry or slightly dampened with water). POT LIFE THE FINISH/HARDENER MIXTURE MUST BE USED
12 hours. Allow the surface to dry for at least three days before covering with carpets or other floor coverings. Also avoid placing heavy objects or damp mopping the floor during this time. Note: If Traffic HD has been combined with Bona Craft Oil 2K then the surface must be allowed to cure for one week before the surface is covered. RECOATING
How To Use Bona Traffic HD and Mega One Flooring Finish
What is the dry time for Bona Traffic HD? Traffic HD is one of Bona’s fastest drying finishes and fully cures in three days. You can walk on it with sock feet after 3-4 hours.
Bona Traffic HD (WT155346001)
Superior 2K waterborne lacquer for wood floors exposed to high traffic and extreme wear. Bona Traffic HD is the world’s toughest and fastest drying lacquer. It allows for full traffic to be resumed just 12 hours after application, and was developed for application on large surfaces.
Mixing ratio: 1 part Hardener to 1 litre Traffic HD or 0.41 L Hardener to 4,54 L Traffic HD (≈8 vol%) Pot life: max. 4 hours at 20°C (shorter if warmer) Dilution: If required, dilute with 4% Bona Retarder for a longer open time. Drying time, until: Recoating: 2-3 hours* Full use: 12 hours* Possible to cover: 3 days*
Bona Traffic HD water-based, non-toxic, timber floor finish coating
Drying time 2-3 hours between coats; 1.5 mg/100 rev wear resistance (SIS 923509) 2 sheen levels: Satin and Extra Matt; Gloss Level (60˚): Satin 45% / Extra Matt 10%
Use only a dry Bona Microfiber Mop or cloth for cleaning during the first week. CLEAN-UP: Application tools should be cleaned with water and stored in an airtight container.
Optimal application conditions are between 18 - 25 C and 40 - 60% relative air humidity. High temperatures and low humidity will shorten the drying time whilst low temperatures and high humidity will lengthen the drying time. The minimum temperature for use is 13 C.
Allow the surface to dry for at least 3 days before covering with carpets or other floor coverings. Also avoid placing heavy objects and avoid damp mopping the floor during this time.
Drying time, until: - Ready for sanding/recoating: 2-3 hours* - Full use: 24 hours* - Possible to cover: 3 days** *under normal climate conditions, 20 C/60% R.H. ** in case the product has been combined with Bona Create or Bona Prime Deep, the floor must be allowed 7 days drying under good conditions, before being covered.
- Some results have been removed