Solid State Drive – SATA SSDs also need SATA power cables and data cables. SATA SSDs can have an average speed of about 550 Mbps, while a standard hard disk drive has a speed of 200 Mbps.

If you need a power adapter for your new hard drive, you will specifically need a "IDE to SATA Serial ATA Hard Drive Power Adapter Cable," which you can purchase at most computer supply stores. If ...

[Marc] is pretty unsatisfied with hard drive docking stations as a whole. He says they are typically slow and unreliable, causing him all sorts of grief while he is troubleshooting a questionable h… ...

There are a number of standards in PCs, but SATA is one of the most common and enduring. It also remains one of the most important storage connection adaptors.

When you’re done connecting the SATA cable, you’ll have to connect the drive to your power supply unit (PSU). The SATA power cable from your PSU, like the SATA data cable, is keyed to fit onto ...

A PATA drive requires 39 or 40 holes in the data cable, and four pins on the power connection. A SATA drive requires two slot-type connectors, with seven contacts on the data connector and 15 ...

Hard drives are available in two basic flavors: SATA (serial advanced technology attachment) and IDE (integrated drive electronics). IDE drives use a 40-pin connection (look for the wide, flat cable).

If you are about to upgrade your SSD or graphics card, you should understand the SATA and PCI Express interfaces. If you know the differences between them, you can avoid making the wrong purchase ...

IDE hard drives might require a 4-pin Molex power connector, rather than a SATA power connector, so Sabrent has also included it as another connector for maximum flexibility.

And this hack using a computer’s SATA cable as an antenna to exfiltrate data is another example of just how many side-channel attacks the typical PC makes available.

There are few ways to make a laptop faster that are as easy and cost-effective as replacing your existing hard drive with a solid state drive (SSD).