Ditto on DHCP being handled on Server 2008 than a physical router. Lease reservations, DHCP migrations, etc. Too many reasons to list. Ditto on the EdgeRouter Lite being a great product.

In the DHCP options, just use the LAN IP of the router for the default gateway (your DHCP server and your router don't have to be on the same physical piece of hardware, as long as the DHCP server ...

Note: If you've heard of static IP addresses before, this is very similar.Since you manage it all from the router, though, it's a bit easier to set up. If, for some reason, you can't use DHCP ...

The Dynamic Host Configuration Protocol (DHCP) simplifies networking by allowing a DHCP server -- any device with a DHCP server role, such as a modem or a router -- to assign Internet Protocol (IP ...

Save your changes, reboot the router and log back in to the router at its new address, for example 192.168.1.2, and enter the new administrative password you assigned. Disable the DHCP server.

When the router computer reboots, you can take out the USB stick and let it boot from the SSD. ... Press return to choose not to use DHCP. Enter an appropriate address, for example 10.1.1.1, ...

Rich Long found that he could not get his MacSense XRouter Pro (MIH-130A) to work with DHCP and Mac OS X 10.0.2. But he found a solution. He writes: "The symptom I saw was that the Mac would ...

This will basically turn your router into a switch, and any computers connecting through the router (either wired or wirelessly) will get NAT, firewall, and DHCP from the ISP’s gateway.