Make sure your drawers close smoothly and silently. Shop this guide to discover our top picks when choosing the best drawer ...

Insert the T-bolt for your knob through the back of the front face (A) slot and into the front slide (D) center hole. Once these two are joined with the knob you can adjust your knob up and down ...

Well placed hardware is ergonomically correct and protects drawer roller slides and cabinet fronts from long-term damage. With this guide, learn how and where to install cabinet hardware.

These slides require clearance – usually 1/2 inch – between the drawer slides and the sides of the cabinet opening. Undermount Undermount drawer slides offer two benefits that side-mount ...

With the drawer slides screwed to the cabinet, place just the tall spacer board inside (remove the shorter piece of plywood if you used one). Then set the drawer on the lip created by the ¾-inch ...

It's likely that the existing drawer slides are what are referred to as 3/4 slides. They allow a drawer to extend from the front of the cabinet to 3/4 of its full depth.

Q: I have a cabinet drawer that no longer slides smoothly. I can move it side to side and up and down. How can I fix this? A: Your description sounds more like a loose tooth than a drawer ...

Whether your cabinets and drawers are difficult to open or won't stay closed, you can fix them with a little attention. Search. Pop Mech Pro; ... Over time, the drawer slides wear out.

1. Drawer Slide: Sits in groove routed in drawer side; screwed to carcase side panel. 2. Bottom Panel: Typically 1/4-inch plywood; fits in groove routed in drawer sides and front.

To get a truly bespoke, designer kitchen-inspired vibe, you should always mix knobs, pulls, and hardware styles within a ...